# I'm having a problem with the bridge

**URL:** <https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395>\
**Category:** General Discussion\
**Created:** [January 19, 2024, 1:39pm UTC](https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395 "2024-01-19T13:39:07Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![WaXy](https://avatars.discourse-cdn.com/v4/letter/w/50afbb/32.png) [@WaXy](https://www.pulsechain.forum/u/WaXy)\
**Post date:** [January 19, 2024, 1:39pm UTC](https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395/1 "2024-01-19T13:39:07Z")

</div>

I was bridging tokens from PLS to ETH last night. the txn shows that it was successful but It doesn’t show in my ETH wallet. Can anyone help. It’s been 8hrs. This hasn’t happened since the launch of PLS bridge

---

<div class="post-metadata">

**Author:** ![cryptocoffee369](https://avatars.discourse-cdn.com/v4/letter/c/f05b48/32.png) [@cryptocoffee369](https://www.pulsechain.forum/u/cryptocoffee369)\
**Post date:** [January 20, 2024, 9:10pm UTC](https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395/2 "2024-01-20T21:10:45Z")

</div>

when going from the PulseChain side to Ethereum, you have to manually click “Claim” on the transaction history page

this was likely due to gas fees so you can choose a time of day where fees are lower

---

<div class="post-metadata">

**Author:** ![FrankBeekay](https://avatars.discourse-cdn.com/v4/letter/f/3bc359/32.png) [@FrankBeekay](https://www.pulsechain.forum/u/FrankBeekay)\
**Post date:** [October 19, 2024, 1:05pm UTC](https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395/3 "2024-10-19T13:05:45Z")

</div>

I have a similar problem in that I was in the middle of a DAI bridge from pulsechain to etherium network and my laptop crashed. Now I cannot see it in my Metamask wallet under either network.

Can I recover this still?

---

<div class="post-metadata">

**Author:** ![Mykola](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@Mykola](https://www.pulsechain.forum/u/Mykola)\
**Post date:** [December 9, 2024, 7:47pm UTC](https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395/6 "2024-12-09T19:47:31Z")

</div>

Hello everyone!  
Glad to meet you!

---

<div class="post-metadata">

**Author:** ![Mykola](https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/32.png) [@Mykola](https://www.pulsechain.forum/u/Mykola)\
**Post date:** [December 9, 2024, 7:50pm UTC](https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395/7 "2024-12-09T19:50:05Z")

</div>

I faced the same issue so I used another bridge.  
Is there any update?

---

<div class="post-metadata">

**Author:** ![Boodacow](https://avatars.discourse-cdn.com/v4/letter/b/dc4da7/32.png) [@Boodacow](https://www.pulsechain.forum/u/Boodacow)\
**Post date:** [January 2, 2025, 4:34pm UTC](https://www.pulsechain.forum/t/im-having-a-problem-with-the-bridge/395/9 "2025-01-02T16:34:22Z")

</div>

I am having an issue where I bridged PLX to ETH. the verification happened, then I clicked claim… I don’t see the eth in my metamask? Does it take a long time? I was connected through the chrome plugin and I approved all the gas fees. I was transferring the more than the gas so I know it was not just eaten by that. Any insight would help. Thanks.